|
This probe can be used to measure small RF currents in the basic configuration and pulse currents with wide ranging magnitudes. |
|
|
Frequency Range: |
100 Hz - 100 MHz |
|
Transfer Impedance (dBW) |
-40 to 17 |
|
Max Cont. Current (Amps) |
200 |
|
Connector: |
N-Type, Female |
|
Physical Dimensions |
|
|
Aperture: |
2.6" (67 mm) |
|
Diameter: |
5.5" (142 mm) |
|
Weight: |
6.0 lb.'s (2.72 kg) |
Features
- Measures currents on 50 Hz, 60 Hz and 400 Hz powerlines
- Ideally suited to measuring currents on large cables.
- Individually Calibrated (Transfer Impedance calibration included)
- High Current Capability
- Split Type Clamp-on Design
Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on current probes. The BCP-519 Current Probe is designed to permit field intensity meters, spectrum analyzers, and other 50 ohm impedance instruments to measure quantitative magnitudes of current. Measurements can be made on single and multi-conductor cables, ground and bonding straps, shielded conduits and on coaxial cables.
The BCP-519 has a usable frequency range of 100 Hz to 100 MHz with a transfer impedance of 0.005 ohms from 10 kHz to 100 MHz. Primary power currents of 200 amperes DC to 60 Hz, 70 amperes 400 Hz and 60 amperes CW and 5,000 amperes pulse will not alter the transfer impedance.
Recommended Accessories
More Information
