Clip-on shield 6500夾式屏蔽
This range of easily mounted clip-on gaskets is composed of a separate sponge rubber water seal and an EMI-shielding side of highly conductive, wear-resistant metallized fabric. The construction is very flexible thanks to the hollow rubber, so a low closure force is guaranteed.
這個系列的容易裝配的夾式墊圈的組成由一個分開的海綿狀橡皮水封和一個高導電的EMI屏蔽側邊，抗磨損的用金屬處理的織物。結構是非常柔軟的，由于空的橡膠，因此確保了一個低的閉合力。
The gasket is assembled without tools, simply by pressing the section by hand onto the metal flange of you enclosure. Different sizes are available on request. The gasket can make angles in two planes where a small radius is sufficient. Temperature range from -40° tot +110° C. A flame retardant version (UL94 V0) is also available (see on the picture below).
該墊圈的裝配不用工具，簡單的通過壓線段用手在你的機殼的凸緣的上面。不同的尺寸根據需要可獲得。該墊圈能在兩個位面里做成角度，這里一個小的半徑是足夠的。溫度范圍從-40°到+110° C。一個阻燃劑版本(UL94 V0)也是可獲得的（看下面的圖片）。
